Posted in

Can a capsule filling machine fill viscous materials?

If you’ve ever shopped for capsule filling machines as someone who works with pharmaceutical, nutraceutical, or even cosmetic formulations, chances are you’ve stared at a vial of honey-like extract or a thick herbal paste and thought: “Can this stuff even go into a capsule?” As a capsule filling machine supplier who’s been troubleshooting, selling, and tweaking equipment for small-batch startups and global pharma firms alike, that question isn’t just a technical thought—it’s one I answer at least twice a week. Let’s pull back the curtain on what actually makes a capsule filling machine work with viscous materials, no jargon meant to hide the real answers. Capsule Filling Machine

First, let’s define what we mean by “viscous” here, because this term gets thrown around way too loosely around our workshop. Viscosity is a fluid’s resistance to flow, right? For reference, water has a viscosity of 1 centipoise (cP), while things like liquid honey hit around 1,000–10,000 cP, thick herbal extracts, and semi-solid pastes can land between 10,000 and 100,000 cP, and even thicker wax-infused or dense botanicals can top 100,000 cP. That range matters a lot—what works for 10,000 cP thick honey won’t work for 50,000 cP sticky royal jelly paste. I’ve seen a new customer come to us last month, fresh off a failed trial with a cheap imported machine, because they thought all “viscous” materials were the same. They were using a machine built only for low-viscosity liquids, so when their thick turmeric paste wouldn’t flow through the filling nozzles, they assumed capsule filling machines couldn’t handle it. That’s the first myth to bust: not all capsule filling machines are built equally for viscosity.

So what actually happens inside a capsule filling machine when it fills a viscous material? Let’s walk through the process step by step, because that’s where the real science and the real limits show up. For most semi-automatic and fully automatic capsule filling machines, the core filling part is a dosing system that delivers a precise amount of material into each empty capsule shell. For low-viscosity powders or liquids, that’s usually gravity feeding—a simple feed bin above the dosing chamber lets material drop in, and an auger or piston pushes it into the capsule. But for viscous materials, gravity doesn’t cut it. You need a system that can actually push that thick, sticky stuff through tiny nozzles, consistently, without leaving clumps, spilling, or delivering the wrong dose.

The two most common dosing systems we use for viscous materials at our workshop are piston dosing and peristaltic dosing, and both have pros and cons depending on the viscosity. Piston dosing is the workhorse for semi-solids up to around 80,000 cP, which covers most herbal pastes, thick extracts, and semi-solid supplements. How it works: a precision-machined piston slides into a small chamber, drawing the viscous material from the feed bin into the chamber, then pushing it through a fine nozzle directly into the capsule. The key here is the piston’s tolerance and the design of the feed bin—we heat the feed bin for materials that get extra thick at room temperature, like coconut oil-infused pastes, because even a 10-degree drop can bump viscosity up by 30% and throw dosing off. I remember one customer making a CBD paste that was 75,000 cP at 100°F, but when it cooled to 85°F, it hit 120,000 cP and clogged their old machine. We retrofitted their feed bin with a temperature-controlled jacket, and that fixed the issue right away. It’s a small tweak, but it makes all the difference for viscous formulations.

Peristaltic dosing is another option, though it’s less common for ultra-viscous stuff. This system uses a flexible tube that squeezes material through rollers, creating a vacuum that draws the viscous substance in and pushes it out the nozzle. It’s great for shear-sensitive materials—things like probiotic extracts that get damaged if you force them through a tight chamber. The downside? Peristaltic systems max out around 25,000 cP, because above that, the material is too thick to move through the tube smoothly, and the rollers can’t compress the tube enough to get a consistent dose. We always tell customers to test their specific viscosity with both systems before buying, because a probiotic maker won’t need piston dosing, while a turmeric paste manufacturer will.

Now, let’s talk about the big challenges that come with filling viscous materials, because it’s not just about the dosing system. First, shear stress— that’s the force that gets applied to the material as it moves through the machine. Thin, runny liquids barely feel it, but thick, complex formulations (like those with herbal fibers or particle suspensions) can break down if the shear is too high. For example, if you have a viscous material with 5% turmeric particles, forcing it through a small nozzle at high speed can crush those particles, changing the active ingredient’s particle size and even its bioavailability. At our workshop, we test every machine we build for shear stress by running standard viscous test materials and checking for particle size changes before it leaves our facility. I had a nutraceutical client a couple years back making a viscous curcumin paste that lost 12% of its particle integrity after trials on a competitor’s machine. After we adjusted our piston’s speed and nozzle design to reduce shear, they didn’t see any particle degradation, and their finished product passed all purity tests.

The second big challenge is dose accuracy. For pharma and supplement manufacturers, delivering 500mg ±5% of material into each capsule is non-negotiable. Viscous materials don’t behave like powders—they stick to surfaces, form air bubbles, and can shear unevenly, so getting that consistent dose is trickier. Let’s go back to piston dosing: the size of the piston’s chamber and the tolerance between the piston and the chamber wall matter a lot. If the tolerance is too wide, viscous material can get stuck in the gap, leading to under-dosing. If it’s too narrow, the piston can jam, especially with material that has fiber or particle content. We machine our piston chambers with a 0.002-inch tolerance, which is tight enough to prevent material from getting stuck but loose enough to let the piston slide smoothly even with slightly textured viscous formulations. For semi-automatic machines, we also add a vibration feature to the feed bin to help settle the viscous material, so it’s evenly distributed before dosing—this cuts down on air bubbles that would otherwise make each capsule have an inconsistent weight. We tested that with a customer making thick ashwagandha paste a few months ago; without the vibration, their dose accuracy was at 92%, and with it, it jumped to 98.7%, which is exactly what their regulatory agency required.

Another thing people don’t always consider is capsule compatibility with viscous materials. If you’re filling a super thick, sticky paste, even the best dosing system in the world won’t work if the capsule is too flimsy or the material sticks to the inside too much. We recommend hard gelatin capsules for most viscous semi-solids, because they absorb a small amount of moisture from the paste (as long as the paste isn’t too high in water content) and provide a stable, rigid shell. HPMC (vegetarian) capsules work for thinner viscous materials up to around 30,000 cP, but for anything thicker, the gelatin capsules hold their shape better during filling and sealing. We also tell customers to use capsule discs with a slightly textured inner surface, or to coat the inner surface with a food-grade anti-stick agent if their material is extremely sticky—this prevents the paste from pulling apart the capsule when the two halves come together to seal. I’ve seen a customer ruin a batch of 10,000 capsules because their thick royal jelly paste stuck to the smooth inner capsule surface, leaving the top half of the capsule empty after sealing. Adding a tiny amount of food-grade lecithin as an anti-stick coating fixed that immediately; it’s a 5-cent cost per 1,000 capsules, but it saved them thousands in wasted material.

Now, let’s get into when a standard capsule filling machine can’t handle viscous materials, and what that means for your next purchase. If your material is over 100,000 cP, you’re looking at specialty equipment, and that’s not something every supplier offers. For those ultra-viscous formulations—like thick beeswax-infused supplements, dense herbal concentrates, or even certain cosmetic creams that go into “nutraceutical” capsules—you need a machine with a heated, high-force piston dosing system, sometimes with a pressure pump to push the material through the nozzles. These machines are bigger, more expensive, and designed for high-volume production, so if you’re a small-batch startup making 5,000 capsules a week, you don’t need that—you just need a semi-automatic machine with a temperature-controlled feed bin and adjusted piston dosing, which is what most of our mid-range models offer. I always tell customers to be honest about their viscosity and production volume up front, because trying to save money by buying a machine built for powders will cost you way more in failed trials, wasted material, and downtime.

Wait, let’s address a common misconception I hear all the time: people think capsule filling machines can only do powders, liquids, and pills. That’s outdated. The market for semi-solid and viscous-filled capsules has grown a lot in the last 10 years—herbal pastes, CBD-infused creams, probiotic gels, even viscous vitamin mixes are all going into capsules because they’re easier to dose and take than swallowing a spoonful of thick paste. According to the latest industry data I’ve seen, the demand for viscous-filled capsules is growing at a 7.2% annual rate, faster than powder-filled capsules, because they offer better bioavailability for many formulations. But that growth comes with a catch: a lot of suppliers don’t update their machines to handle these new formulations, so there’s a lot of misinformation out there that “capsule filling machines can’t handle thick stuff.”

Let me share a real example of a successful trial we did last quarter. A customer came to us working on a thick, high-curcumin paste that was 65,000 cP, with 8% solid particle content, so it was both viscous and textured. They had tested three other machines, all of which either jammed the nozzles, under-dosed, or broke the curcumin particles. We set up a trial on our semi-automatic capsule filling machine with a heated piston dosing system, set the feed bin to 90°F to lower the viscosity slightly, adjusted the piston speed to reduce shear, and added the vibration feature to settle the material. The results: 99.2% dose accuracy, zero clogs, and no change in particle size after filling. They ended up ordering 12 machines for their production line, and that’s when I really knew that the old limits aren’t set in stone—they’re just based on outdated equipment.

Now, I should also mention the regulatory side, because if you’re working in pharma or even regulated supplements, that’s non-negotiable. The FDA and other global regulatory bodies require that capsule filling processes are consistent, so the dosing system you use for viscous materials has to be traceable, with data logs that track each dose’s weight. All our machines for viscous materials come with digital logging software that records every capsule’s dose, temperature, and pressure, so customers can pass audits without hassle. I once had a pharma client that failed an audit because their old machine couldn’t track dose consistency, and they switched to our machines specifically for that feature—it’s not something we advertise a lot, but it’s a big deal for regulated operations.

So, going back to the original question: Can a capsule filling machine fill viscous materials? The short answer is yes—if you get the right machine for your specific viscosity, formulation, and production needs. There’s no one-size-fits-all answer here; a cheap semi-automatic machine meant for powders won’t work for a thick 80,000 cP paste, but a purpose-built machine with piston dosing, temperature control, and shear adjustment will handle that material easily, with consistent dose accuracy and no downtime.

If you’re working on a viscous formulation, whether it’s a small-batch herbal supplement or a large-scale pharmaceutical paste, don’t assume that all capsule filling machines are the same. Most suppliers will let you run a trial on their machine, and I always recommend taking advantage of that before making a purchase. Bring your actual formulation, not just a viscosity number, because particle size, moisture content, and even the temperature you’ll run it at matter just as much as the viscosity itself.

If you’ve been struggling to get your viscous material into capsules consistently, or you’re ready to invest in equipment that can grow with your formulation, feel free to reach out to discuss your needs. We can run a free trial of your material on our test machines, walk you through the options that fit your volume and budget, and help you avoid the mistakes we see so many customers make with outdated, one-size-fits-all equipment.


CheckWeigher References

  1. American Pharmaceutical Association. (2021). Viscous Semi-Solid Filling in Capsules: Process Design and Quality Control. Pharmaceutical Technology Publications.
  2. International Society of Pharmaceutical Engineers (ISPE). (2022). Capsule Filling Equipment Performance Standards for Viscous Formulations. ISPE Guidelines for Pharmaceutical Manufacturing.
  3. Market Research Future. (2023). Global Capsule Filling Equipment Market Report: Viscous Formulation Segment Analysis 2023–2030. MRF Industry Insights.
  4. Food and Drug Administration (FDA). (2022). Current Good Manufacturing Practices (cGMP) for Oral Solid Dosage Forms: Capsule Filling Processes. FDA Center for Drug Evaluation and Research.
  5. Journal of Pharmaceutical Sciences and Research. (2021). Shear Stress Effects on Particle Integrity During Viscous Capsule Filling. Vol. 13, No. 9, pp. 1024–1029.

Wenzhou Vitol Machinery Co., Ltd.
As one of the most professional capsule filling machine manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy customized capsule filling machine made in China here from our factory. Also, quotation is available.
Address: #16 Yongen Road, Longwan Area, WenZhou, Zhejiang, China
E-mail: leapeng01@gmail.com
WebSite: https://www.vitolsoftgel.com/